|
Post by radio87 on Nov 24, 2018 22:35:37 GMT
Hello i like to use rabbit ecu in this project for alfa romeo gtv v6 turbo with engine code ar16202 ,i need your opinion and your help if the rabbit ecu support this engine setup.thanks all for responce and for your time.
|
|
|
Post by Admin on Nov 27, 2018 4:12:30 GMT
Hi,
Yes I'm sure this would work OK. The injectors need to be high impedance though and also it easier to fit a boost map sensor than to tune using the air flow meter. Do you have a wiring diagram I can check to be 100% sure of everything?
Cheers,
Matthew
|
|
|
Post by radio87 on Nov 27, 2018 13:28:22 GMT
Thanks for responce i try to find the wiring and i send you .can you tell me where to buy your ECUHost MK60 because i already found the rabbit ecu but doesnt find the ecu host.thanks for support.
|
|
|
Post by Admin on Nov 28, 2018 2:36:48 GMT
Hi,
OK great :-) If you want to use the ECUHost MK60 instead of Arduino Due I can sell you one direct (AUD50). Please note for the moment I am concentrating on Arduino Due support and do not support the MK60 code it is completely DIY.
Cheers,
Matthew
|
|
|
Post by radio87 on Nov 28, 2018 18:29:08 GMT
Thanks for responce . i undertand you about mk60 for this reason i prefer to use arduino due.
|
|
|
Post by radio87 on Nov 28, 2018 18:32:36 GMT
I try to buy from tindie now but i receive error about my country ,you dont send in my country .can you tell how to buy .
|
|