|
|
Post by gpgarage on Nov 3, 2022 8:46:43 GMT
Greetings, this is my first time in the RABBIT world, I was in disbelief at all that Matt is ungrateful to do.
Today I start my approach with RABBIT because I have to realise a project involving the DSG DQ250 on board of a VW POLO MK2 TDI with EDC15 engine control unit, here are my questions:
Where can I buy the configuration for DSG Control?
How much does it cost?
Does it have installation support? (I am fairly good at sniffing can messages if needed)
I think these messages are enough to get started, again congratulations Matt I'd be thrilled to talk to you and learn about your great potential.
Thank you all.
|
|
|
|
Post by Admin on Nov 6, 2022 2:46:18 GMT
Hi, Thanks for finding my project :-) You don't need to buy the code if you this is your own project to make for yourself. This is a GPL project and the code is open source - you can find it here: github.com/RabbitECUProject/RabbitECUTeensyMCUXpressoIf you look at the code in file source/Client/DIAG.c you can see where the outgoing CAN messages are sent. For example, search for "stCANMsg.u32ID = 648" and you can see a CAN message being sent on ID 648. There is also a sample of CAN traffic of all IDs in another thread in this forum. You can purchase the Rabbit ECU which runs the code if you want. I sell on Tindie, but unfortunately the Teensy 3.5 version is unavailable right now. Very soon I will have some more NXP Kinetis boards available that will happily run the Teensy project code. Sorry for the delay - NXP has not been making Kinetis MCUs available in a timely manner. Sad because they are such a capable MCU :-( I am happy to give installation support on any of the Rabbit ECU purchased at Tindie. Hope this information helps. And thanks for your compliments, that is kind of you. Matthew |
|
|
|
Post by gpgarage on Nov 7, 2022 16:19:07 GMT
Matthew, unfortunately I'm not so good at understanding your code, I'd rather have a ready-made ECU that would do the job on its own, like the DSG Inside, but I like your design too much and wanted to buy yours.
I would also need an ECU for GDI Mercedes AMG35, but I think here too you have to wait for the MCUs to arrive.
If you think with your RABBIT you can manage the Mercedes AMG35 GDI engine with double phase shifter, I would be willing to help you with oscilloscope or whatever you need as signals or whatever.
I hope it can be done, that would be great and let's bring the Rabbit to Italy.
Gianluca
|
|
|
|
Post by Admin on Nov 9, 2022 9:51:51 GMT
Hi mate,
I understand - I really hope to have some ready-made ECUs available again as the MCU supply comes back.
Wow AMG35 that would be quite a project - I love those cars when they have a crackle tune.
In Australia AMG is a status brand - there is of course no status in owning a Rabbit ECU :-P
Regardless, I'd be happy to collaborate - looking into and learning about the double phase shifter :-)
Best Regards,
Matthew
|
|
|
|
Post by gpgarage on Nov 9, 2022 15:40:03 GMT
Matthew,
If we want to start studying each other, we can make a dedicated post and start sharing all the information, such as wiring diagram, operating strategies and other info we find.
Let me know.
Best regards
|
|
|
|
Post by Admin on Nov 13, 2022 3:38:14 GMT
Hey Gianluca,
Sure, please feel free to create another post with a name the suits better :-)
Also, it is worth checking for both ideas - the VW POLO MK2 TDI and the AMG 35 if they use piezo or solenoid injectors.
I wasn't planning for Rabbit ECU to support piezo injectors any time soon - unless some clever person can design a piezo driver daughterboard :-O
Are VW Golf GTI/R popular in Italy - possibly this is an easier vehicle to work with...
Cheers,
Matthew
|
|
