|
Post by 22022255 on Jan 1, 2023 23:20:13 GMT
Hello all. I'm new to the rabbit world and I'm hoping someone can give me some pointers.
I'm working with a Rotax 600 E-tec 2 stroke direct injected engine. It doesn't use an injection pump, it just has the regular 43psi in tank pump and then the injectors themselves act as the high pressure pump. They are 55vdc injectors at about 1.4 ohm. Which board supports these injectors and what all would I need to do to get these to work? Tia
|
|
|
Post by Admin on Jan 4, 2023 8:50:15 GMT
Hi mate,
Thanks for the heads up of this technology - I have heard of the Rotax engines but didn't look too closely at the injection system before.
After poking around online, I believe that these injectors need reversible current control - perhaps like piezo injectors.
Can you confirm this or have any more information?
The Rabbit ECU can control 4 injectors in the conventional one-way current flow - high voltage peak, low voltage hold - so I don't think the existing Rabbit ECU can help in this case :-(
Sounds very cool though - please feel free to share if you have any info on how this might be achieved DIY style :-)
Cheers,
Matthew
|
|